
Orlando's retail, hotel, and apartment properties across Orange and Osceola counties depend on solid, properly built parking lots to handle daily traffic, standing water from summer thunderstorms, and the weight of delivery trucks. Parking lot paving and construction in Central Florida requires more than laying hot mix asphalt over sand; it demands a confined aggregate base, proper drainage pitched to retention ponds, and proof-rolling of the subgrade to prevent settlement and cracking. Orlando Asphalt Paving has built commercial lots since 2014 across the region, from smaller retail pads in Winter Park and Altamonte Springs to larger hotel and apartment complexes in Kissimmee and Dr. Phillips. We understand the local terrain, the drainage challenges that come with proximity to lakes and sinkholes, and the permitting rules that vary from city to city. A well-constructed parking lot lasts 15 to 20 years; a poorly built one fails in half that time, and water pooling in low spots accelerates that failure. We start with a site visit, measure the lot, assess the subgrade, and deliver a written estimate with tonnage and thickness specs so you know exactly what you are paying for.
Why Parking Lot Paving Matters in Orlando's Commercial Market
Orlando's commercial real estate sits on deep, well-drained Central Florida ridge sand over porous limestone. That sand drains fast, but it gives a loose base nothing to bear on unless it is confined and compacted. Water is the enemy: daily summer thunderstorms with some of the heaviest lightning in the country, hurricanes that arrive weakened but still dump heavy rain, and standing water where a lot sits low near a lake or retention pond. Asphalt that is not pitched correctly or built on an unconfined base will fail within five to eight years, not the fifteen to twenty you expect. A parking lot that pools water invites liability claims, damages vehicles, and looks unprofessional to tenants and customers.
- We proof-roll the subgrade before placing any aggregate to verify the base will not settle under traffic.
- We place a confined aggregate base in lifts, compacting each layer to ensure proper bearing capacity on Orlando's loose sand.
- We pitch the finished surface to the nearest drainage pond or storm inlet so water does not pool in the lot.
- We deliver a written estimate with thickness, tonnage, and binder course specs so you know the scope before we start.
- We coordinate with local building departments on permits, stormwater rules, and any drainage structure work your lot requires.
A parking lot built to spec will handle Orlando's climate and traffic for fifteen to twenty years without major repair.
Key info: Orange County and the City of Orlando require permits for commercial paving and impervious-surface additions. Stormwater rules vary by municipality. Verify your lot's specific requirements with your local building department before requesting an estimate. We help you navigate the permitting process, but the homeowner or property manager is responsible for confirming local rules.
For more information on the commercial parking lot process and permitting in your area, see the City of Orlando Building Services website.
How We Build a Parking Lot in Orlando: Our Process
A commercial lot in Orlando starts with a clear picture of what you have and what you need. We visit the site, measure the existing surface or the proposed footprint, check drainage, and assess the subgrade. If the lot is a rebuild on existing asphalt, we mill the old surface and salvage the material if it is suitable. If it is new construction, we grade and prepare the subgrade, place aggregate base in compacted lifts, and finish with hot mix asphalt in a binder course and a top surface course. Every step is documented, and we deliver tonnage specs so you have a record of what was placed.
- We measure and assess the lot, subgrade, and drainage during a free site visit.
- We prepare the subgrade by grading and compacting, then proof-roll it to verify bearing capacity.
- We place aggregate base in lifts, compacting each layer to the required density.
- We install a binder course to bind the base to the surface course.
- We finish with a surface course pitched to drainage, compacted and finished for a smooth, professional appearance.
- We provide a written record of tonnage, thickness, and materials so you have documentation for insurance and resale.
The entire process, from site prep to finish, depends on lot size and subgrade condition. Most commercial lots take one to three weeks from start to drive-ready.
Example: A 15,000-square-foot retail lot in Kissimmee with a stable subgrade and clear drainage takes roughly five to seven working days from site prep through finish. A 30,000-square-foot hotel lot in Orlando with poor subgrade or complex drainage may take two to three weeks. We schedule around your business hours and provide a timeline before work begins.
If your lot is showing signs of failure, see our page on parking lot repair and resurfacing to understand whether repair or reconstruction is the right choice.
Parking Lot Paving Methods and Materials
| Approach | Description | Best for |
|---|---|---|
| Full Depth Construction | Grade and compact subgrade, place confined aggregate base in lifts, install binder and surface courses. Tonnage and thickness documented. | New construction, expansion, or lots with failed subgrade or poor drainage. |
| Mill and Overlay | Mill existing asphalt, salvage material, place new binder and surface course over the existing base. Faster and less costly than full depth if base is sound. | Existing lots with stable subgrade and minor surface distress. Reduces hauling and site disruption. |
| Asphalt Resurfacing | Place new surface course asphalt directly over existing pavement without milling. Raises elevation slightly and adds one to two inches of new surface. | Lots with alligator cracking or minor rutting in the surface layer only. Not suitable if base is compromised or drainage is poor. |
| Patching and Partial Repair | Full-depth patch individual potholes or failed sections, feather edges, and match to surrounding surface. Tonnage documented. | Isolated damage, pothole repair, or localized failure. Not suitable for extensive cracking or base failure affecting more than thirty percent of the lot. |
Parking Lot Paving and Construction Cost in Orlando: What to Expect
Parking lot paving in Orlando is quoted on site, by measurement, because every lot is different. The cost depends on lot size, existing surface condition, subgrade stability, drainage requirements, and whether you are building new or resurfacing an existing lot. A free commercial estimate is the right starting point. We measure the lot, assess the base, and provide a written quote with tonnage, thickness, and material specs so you know exactly what the work includes and why it costs what it does.
Several factors move the cost up or down. A new lot on stable subgrade with clear drainage costs less per square foot than a rebuild with poor base conditions or complex grading. Milling and salvaging existing asphalt is cheaper than full-depth removal and disposal. A lot that requires curbing, aprons, or drainage work adds scope and cost. Winter weather rarely stops paving in Orlando, but summer thunderstorms can delay work, so schedule in the dry season if possible.
The honest advice is to get two or three estimates from contractors who will measure the lot, walk the subgrade, and provide written tonnage specs. A low price without tonnage or thickness details is a red flag. We deliver a free estimate within 24 hours at (321) 352-4836. See our pricing page for typical ranges and what moves the cost.
Parking Lot Paving and Construction Near Me: What to Look for When Hiring a Contractor
Hiring a parking lot contractor in Orlando is a significant investment, and the contractor you choose will determine whether your lot lasts fifteen years or fails in five. Insurance and local standing matter more than you might think. A contractor who is fully insured protects you from liability if someone is injured on the job or if equipment damages adjacent property. A contractor with a local address and local plates is verifiably present in the community; a traveling crew with out-of-state plates and no written contract is the classic marker of a paving scam. Get a written estimate with tonnage and thickness specs, check references from recent work in your area, and verify that the contractor understands local permitting and drainage rules.
- Ask for proof of full insurance coverage and verify it covers liability and property damage during the job.
- Request references from three recent parking lot projects in Orlando, Kissimmee, or Winter Park, and call them to ask about quality and timeline.
- Verify that the contractor provides a written estimate with tonnage, thickness, and material specs before any work starts.
- Confirm that the contractor coordinates with your local building department on permits and understands stormwater rules in your city or county.
- Check that the contractor explains subgrade prep and drainage and does not skip these steps to save money.
- Avoid contractors who demand a large cash deposit, offer a price that is too good, or pressure you to sign before you have a written contract.
A reputable contractor will answer your questions, provide references, and explain the work in plain language. If something feels rushed or unclear, get another estimate. Contact us for a free site visit and written estimate at Orlando Asphalt Paving.
Parking Lot Paving & Construction in Orlando: Pricing Guide
| Service | Price | Details |
|---|---|---|
| Free commercial estimate | Free | Site visit, measurement, subgrade assessment, written quote with tonnage and thickness specs |
| Full-depth parking lot construction | Starting at $3.50 per sq ft | New lot on stable subgrade with clear drainage. Cost moves up with poor base, complex grading, or curbing |
| Mill and overlay | Starting at $2.25 per sq ft | Existing lot with stable base. Salvaged asphalt reduces material cost. Price varies by existing condition |
| Asphalt resurfacing | Starting at $1.50 per sq ft | Surface-only refresh on sound base. Not suitable if base is compromised or extensive cracking present |
| Pothole patching and spot repair | On estimate | Full-depth patch cost varies by size, depth, and number of potholes. Call for emergency same-day pricing |
| Travel and coordination | Included | No separate travel fee for Orlando and surrounding counties. Permitting coordination included in estimate |
Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (321) 352-4836.