Melbourne's driveways sit on Brevard County's sandy base, where summer thunderstorms and tropical rain are the real enemy. From the older in-town homes near downtown to the newer subdivisions spreading toward the county line, we see the same problem: sand that drains fast but holds no load unless it is compacted, and standing water that softens the base after a heavy season.
Orlando Asphalt Paving has served Melbourne and the surrounding Orlando area since 2014. When your driveway settles at the edges, cracks under the summer sun, or holds water after a storm, we show up local, measure it straight, and tell you whether it needs a patch, a resurface, or a full replacement. No itinerant crews, no leftover-asphalt pitches, just honest work at (321) 352-4836.
Asphalt Paving in Melbourne (32935)
Melbourne's paving challenges are specific to the terrain and climate. Your driveway sits on deep, porous sand over limestone. That sand drains well in normal weather, but it gives almost no bearing unless it is confined and compacted. When rain sits or when a tropical system dumps heavy water, that loose base softens, and the asphalt above it cracks, settles, or breaks at the edges where the sand was never compacted in the first place. Sun and water are what break pavement here, not frost heave. Daily summer thunderstorms with some of the heaviest lightning in Florida, occasional hurricanes that arrive weakened but still drop rain, and retention ponds and lakes that sit near many driveways all mean standing water and failed drainage are the most common emergency we see in Melbourne.
A properly built driveway or parking lot starts with a compacted aggregate base, thick enough and well-confined to carry the load. That base must have pitch and drainage so water runs off or percolates down, never pools. Hot mix asphalt over that base, laid at the right thickness and temperature, is what holds up in Brevard County. Our team has been doing this work in the Orlando area and Melbourne since 2014, and we know the sand, the drainage, the rain, and what works.
Our services in Melbourne
- Asphalt Driveway Paving & Installation in Melbourne · Orlando driveways need a compacted base that confines the ridge sand before any…
- Driveway Repair in Melbourne · Orlando driveway edges often break down where unconfined ridge sand gives way…
- Pothole Repair & Asphalt Patching in Melbourne · Orlando potholes usually start where standing water sits on sandy soil near a…
- Asphalt Resurfacing & Overlay in Melbourne · An Orlando driveway with a sound base but a sun-faded top is often a fair…
- Asphalt Milling & Removal in Melbourne · Orlando removal jobs often mill down past a sun-faded surface to the compacted…
- Driveway Replacement in Melbourne · Orlando driveways broken down past patching over loose ridge sand usually need…
- Parking Lot Paving & Construction in Melbourne · Orlando's hotel, retail and apartment lots across Orange and Osceola counties…
- Parking Lot Repair & Resurfacing in Melbourne · Orlando parking lots break down fastest where sand shoulders go unconfined near…
- Recycled Asphalt & Millings Driveways in Melbourne · Orlando millings driveways pack down hard over loose ridge sand…
- Tar & Chip Driveways in Melbourne · Orlando tar and chip drives suit the 1920s bungalow lots in College Park where…
- Gravel Driveway Installation & Grading in Melbourne · Orlando gravel drives need regrading often since loose ridge sand shifts fast…
- Private Road & HOA Paving in Melbourne · Orlando's gated subdivisions toward Lake Nona and Dr. Phillips need HOA roads…
- Driveway Extensions, Widening & Aprons in Melbourne · Orlando driveway extensions tie new hot mix into older bungalow aprons without…
- Sports Court & Path Paving in Melbourne · Orlando sports courts need a well-compacted sand base so summer storms and…
How a Job Works in Melbourne
First, we come to your property for a free on-site assessment. We look at the driveway or lot, measure it, check the base and drainage, and talk through what is actually wrong and what will fix it. We give you a written estimate with tonnage specs and the thickness we will lay. No surprises, no pressure.
When we start work, we bring in the equipment we need. On tight in-town lots in older Melbourne neighborhoods, we plan access carefully so we are not tearing up your neighbors' property. If you are in an HOA community, we coordinate with the architectural review so there are no delays. We do any excavation, grading, or base work that the job requires, lay the asphalt at the right temperature and thickness, and proof-roll it to confirm the base is solid. On a resurfacing, we mill off the old surface if needed, prep the existing base, and lay new asphalt. On a repair, we cut out the failed section cleanly, build the base back up, and match the existing grade.
When we are done, we sweep and clean the site. You get a final walkthrough so you see the work is complete and the property is left right.
Pricing for driveway and parking lot work in Melbourne depends on square footage, the condition of the existing base, access for our equipment, and the thickness and type of asphalt you choose. A new residential driveway typically runs from $6 per square foot and up. Resurfacing an existing drive, where the base is still sound, starts from $4 per square foot. Pothole repair and spot patching start at $450, and a full driveway replacement starts from $7 per square foot. Parking lot work is quoted on site. The most common cost factors are the size of the job, whether we need to excavate and rebuild the base, and the drainage and grading required to keep water off the pavement. We give you a free estimate with all the details so you know exactly what you are paying for. Call us at (321) 352-4836 to schedule your site visit.
✅ Written Estimates & Tonnage Specs, fully insured for work in Melbourne and nearby areas.